Description
12V 100A AC Charger for SIO2 / AGM / Sealed / Wet Batteries
100A charger is used for SiO2 battery bank of 400Ah (25% charge rate)
The PowerMax PM3-100LK charger/converter has a fully integrated 3-stage microprocessor controller along with its highly controlled power supply output. The LK Series features a selector between 3-Stage Smart charging or Fixed Output Mode* for faster charging needs.
The PM3 can accept a low voltage input of 105 volts, and up to 135 VAC on the high end. Weighing in at approx. 8 lbs pounds the PM3-100-LK is a great option for RV, radio, backup power, and pump use, as well as many other extremely high amperage demands. Because of its high demand abilities, the PM3 must be installed in a well-ventilated area where it will be safe from the environment.
Using only the best in manufacturing technology, Power Max has designed and built a powerhouse charger/converter. Capable of providing a constant load demand of up to 100% of its rated capacity, the PM3 series converters are among the best. Pumps, fans, motors, and radio equipment will run with no problems on the PM3 converter/charger.
- Selectable 3-Step Charging Mode or Fixed Output Mode
- Adjustable Voltage Dial
- Variable Speed Cooling Fan
- Demand Sensing
- Reverse Polarity Protection
- Over Voltage Protected
- Short Circuit Protection
- Overload Protection
- Line Regulation
- Load Regulation
- Thermal Protection
- 2 Years Warranty
- Model: PM3-100LK
-
- Dimensions (LxWxH): 7.15 x 11 x 3.48 in
- Weight: 7.8 lb
- Shipping Weight: 10 lb
- Output Amperage, Max Continuous: 100 A
- Max Current, During Bulk Charge: 100 A
- Output Voltage Full Load: 13.4 V
- No Load Voltage: 13.6 V
- Maximum AC Current @ 108 VAC: 17 A
- AC Input Volts: 115 V
- AC Input Volts Freq.: 47/63 Hz
- AC Input Volts Range: 105–135 V
- Float Current: Variable
- Model: PM3-100LK
- Manufacturer: Power Max
- Bulk Voltage: 14.6v ± 0.2v (default) / Adustable between 13v to 16.5v
- Float Voltage: 13.2 V
- Typical Efficiency: 85%
- Maximum Power Output, Continuous: 1440 W
- Charge Reset: Battery Voltage Threshold: 12.6 V
- Working Temperature: 0° to 45° C
- Storage Temperature: -20° to 80° C
- Over Temperature: 80° C
- Ripple and Noise: 100 mV rms
- Output Banks: 1
- Regulatory Approval: UL Listed
- Manufacturer Part #: PM3-100LK
- Made In: China
