Description

MPP Solar Charge inverter 6500W 48V DC, MPPT 120A, 90A AC charger

All in one Hybrid System, LV6548

*special order only – prepaid only – usually 3-4 weeks lead time. 

• • • 6500W 48V

    • 120A 48V Solar Charge Controller

    • 90A Ac Charger

    • Supports up to 8000W of Solar with dual 4000W PV inputs up to 120A

    • Built-In Parallel Kit

    • CAN be paralleled up to 6 units, units have internal parallel function

    • Split phase capable with 2 units in parallel

    • Built-In WIFI Transmitter to Monitor Data from Smartphone

    • This unit is UL Certified for off-grid use

    • BMS Support for pylontech, WECO and Soltaro lithium batteries (special cable required and sold separately)

    • Supports up to 4000W solar

    • Programmable timer control

    • Your battery bank must be 48V to work with this inverter-charger BUT you can use without batteries for direct from solar power.

This product includes a 6500W Solar Charge Inverter with 48V DC Power, a MPPT 120A Charge Controller and a 90A AC charger, it’s all in ONE Hybrid Solar System.

Ideal for RV’s , Cabins and homes with 48V battery power, can start your generator automatically / or j just switch over to utility power if battery runs low during poor daylight / night time. (and recharge the battery at the same time). Perfect for keeping your furnace/ electrical refrigerator running through the night without having to run the generator to keep the battery charged.

Features

• 110V / 120V adjustable output design for low voltage area like North America
• Pure sine wave inverter with built– in solar controller
• 120A MPPT built-in solar charger
• 50Hz & 60Hz support
• Selectable AC input volt range65-140VAC * depending on mode.
• Parallel-ready, but needs 2 units
• Can be split phased with parallel operations (you need 2 units)
• Programmable parameters
• 90A charging from AC (grid or generator**)
• This is not for grid tie, it is only for off-grid use
• Adjustable bulk & float charging voltage
• Genset starter dry contact
• Overload and short circuit protection
• Lightweight, easy to install
• FREE monitoring software
• LCD Display LED indicators

**requires inverter-type generator of acceptable output quality

ELECTRICAL SPECIFICATIONS
Max Continuous Power: 6500W
Parallel Capability: Yes up to 6 units
Input Voltage Range: 65~140VAC (Appliance mode), 95~140VAC (UPS mode)
Input/Output Frequency: 50Hz/60hz Auto sensing
Output Voltage: 120VAC  and 240VAC ±5% user selectable
Output Waveform: Pure Sine Wave
Peak Efficiency: 91%
Nominal DC Voltage: 48V
Max DC Voltage (battery): 62V
Transfer Time: <15ms (UPS mode), <20ms (Appliance mode)
Charging Mode: 3-stage
AC Recharging Current: 90A
No Load Power Consumption: <70W
Power Saving Mode: <15W

SOLAR CHARGER

2 PV inputs
Algorithm: MPPT
Min PV input 90V DC
Max PV Input / Output: 4000W x 2
Max Charging Current: 18A
Max PV Input Voc: 250V
MPPT Range: 120A DC
Number of PV input: 2 per unit
Standby Power: 2W

ENVIRONMENTAL / MECHANICAL SPECIFICATIONS

Genset Starter: This port will send a signal to a compatible generator and start it up when solar battery is low. Requires compatible generator with autostart.

Communication: USB, BMS, RS232, WIFI, Dry contact
Operating /Storage Temperature.: -10°C ~ 40°C / -15C- 60C
UL1741 Compliant (TUV)
Operating Humidity: 5~95%RH Non-Condensing
Dimension: 554 x 433 x 148  mm
Net Weight 19kg

 Spec Sheet: 

LV6548 Spec-min

Manual:

LV6548 Manual

 

Volume discount for 2 Purchases.