Description
MPP Solar Charge inverter 2000W DC 24V, MPPT 80A, 60A AC charger
All in one Hybrid System, 2024LV-MK
-
-
-
2000W 24V
-
80A Solar Charge Controller
-
60A Ac Charger
-
Supports up to 2000W of Solar
-
Can be paralleled with up to 9 units
-
-
This product includes a 2000W Solar Charge Inverter with 24V DC Power, a MPPT 80A Charge Controller and a 60A AC charger, it’s all in ONE Hybrid Solar System.
Ideal for RV’s , Cabins and homes with 24V battery power, can start your generator automatically / or j just switch over to utility power if battery runs low during poor daylight / night time. (and recharge the battery at the same time). Perfect for keeping your furnace/ electrical refrigerator running through the night without having to run the generator to keep the battery charged.
Features
- 110V / 120V adjustable output design for low voltage area like North America
- Pure sine wave inverter with built– in solar controller
- 80A MPPT built-in solar charge controller
- Can be paralleled with up to 9 units
- 50Hz & 60Hz support
- Selectable AC input volt range
- Programmable parameters
- 60A AC charging (grid or generator**)
- This is not for grid tie, it is only for off-grid use
- Adjustable bulk & float charging voltage
- Genset starter dry contact
- Overload and short circuit protection
- Lightweight, easy to install
- FREE monitoring software
- LCD Display + LED indicators
**requires inverter-type generator of acceptable output quality
ELECTRICAL SPECIFICATIONS
Max Continuous Power: 2000W
Parallel Capability: None
Input Voltage Range: 95~140VAC (UPS mode)
Input/Output Frequency: 50Hz/60hz Auto sensing
Output Voltage: 110/120VAC±5% user selectable
Output Waveform: Pure Sine Wave
Peak Efficiency: 90%
Nominal DC Voltage: 24V
Max DC Voltage (battery): 32V
Transfer Time: 4ms (typical)
Charging Mode: 3-stage
AC Recharging Current: 60A
No Load Power Consumption: <25W
Power Saving Mode: <10W
SOLAR CHARGER
Algorithm: MPPT
Max PV Input / Output: 2000W
Max Charging Current: 80A
Max PV Input Voc: 145V
MPPT Range: 30~115V
Standby Power: 2W
ENVIRONMENTAL / MECHANICAL SPECIFICATIONS
Operating/Storage Temp.: 0°C ~ 55°C / -15°C~ 60°C
Operating Humidity: 20~90% RH Non-Condensing
Dimension: 355*272*100mm (14 x 10.7 x 4″)
Net Weight 6.5kg
PIP-LV Spec Sheet:
PIP-LV User Manual:
