MPP Solar Charge inverter 2400W DC 24V, MPPT 80A, 60A AC charger all in one Hybrid System, 2424HV-LV


MPP Solar Charge inverter 2400W DC 24V, MPPT 80A, 60A AC charger all in one Hybrid System, 2424HV-LV

Available on backorder


MPP Solar Charge inverter 2400W DC 24V, MPPT 80A, 60A AC charger

All in one Hybrid System, 2424HV-LV

*special order only – prepaid only – usually 3 weeks lead time. 

      • 2400W 24V

      • 80A 24V Solar Charge Controller

      • 60A Ac Charger

      • Supports up to 2000W of Solar

      • CAN be paralleled up to 9 units

      • Split phase capable with 2 units in parallel

      • Not CSA or UL Listed, so cannot be grid tied – needs field certification

This product includes a 2400W Solar Charge Inverter with 24V DC Power, a MPPT 80A Charge Controller and a 60A AC charger, it’s all in ONE Hybrid Solar System.

Ideal for RV’s , Cabins and homes with 24V battery power, can start your generator automatically / or j just switch over to utility power if battery runs low during poor daylight / night time. (and recharge the battery at the same time). Perfect for keeping your furnace/ electrical refrigerator running through the night without having to run the generator to keep the battery charged.


  • 110V / 120V adjustable output design for low voltage area like North America
  • Pure sine wave inverter with built– in solar controller
  • 80A MPPT built-in solar charger
  • 50Hz & 60Hz support
  • Selectable AC input volt range65-140VAC * depending on mode.
  • Parallel-ready, but needs 2 units and 2 parallel kits to function in parallel
  • CAn be split phased with parallel operations (you need 2 units)
  • Programmable parameters
  • 60A charging from AC (grid or generator**)
  • This is not for grid tie, it is only for off-grid use
  • Adjustable bulk & float charging voltage
  • Genset starter dry contact
  • Overload and short circuit protection
  • Lightweight, easy to install
  • FREE monitoring software
  • LCD Display LED indicators

**requires inverter-type generator of acceptable output quality


Max Continuous Power: 2400W
Parallel Capability: Yes, with parallel kit, up to 9 units
Input Voltage Range: 65~140VAC (Appliance mode), 95~140VAC (UPS mode)
Input/Output Frequency: 50Hz/60hz Auto sensing
Output Voltage: 120VAC  and 240VAC ±5% user selectable
Output Waveform: Pure Sine Wave
Peak Efficiency: 91%
Nominal DC Voltage: 24V
Max DC Voltage (battery): 31V
Transfer Time: <10ms (UPS mode), <20ms (Appliance mode)
Charging Mode: 3-stage
AC Recharging Current: 60A
No Load Power Consumption: <50W
Power Saving Mode: <15W

Algorithm: MPPT
Max PV Input / Output: 2000W
Max Charging Current: 80A
Max PV Input Voc: 145V
MPPT Range: 30V-80V DC
Number of PV input: 1 per unit
Standby Power: 2W


Genset Starter: This port will send a signal to a compatible generator and start it up when solar battery is low. Requires compatible generator with autostart.

Communication: USB and RS232
Operating /Storage Temperature.: 0°C ~ 50°C / -15C- 60C
Operating Humidity: 20~90%RH Non-Condensing
Dimension: 468 x 295 x 120 mm
Net Weight 12kg


PIP-LV Spec Sheet: 


Volume discount for 2 Purchases.